Aluminium balconies and dissimilar metals: what to check at connections
Aluminium balconies combine profiles, fasteners, railings and other components that need to work together. When commissioning them, knowing the material of the main structure is only part of the picture. It is also useful to ask what the aluminium will touch, where water can reach the connection and who will confirm that the combination is suitable. These questions matter for a new balcony and for interfaces with retained flashings or accessories.
This guide helps property managers and flat owners ask specific questions about contact between materials. For complete assemblies, see our aluminium suspended balconies for blocks of flats. The following steps turn a vague statement in a quotation into a documented detail, without asking residents to select fasteners or alter structural fixings themselves.

This photograph from the HS ALUSYSTEM portfolio shows balconies during building refurbishment. It does not reveal concealed material interfaces or show an identified corrosion defect.
1. What galvanic corrosion means
Three conditions to consider together
Galvanic corrosion can occur when dissimilar metals are electrically connected in the presence of a conductive liquid. The BSSA technical overview explains the principle. Seeing two different metals together does not, by itself, establish that something is wrong.
For the project brief, identify the actual location. Is it a connection between structural members, an infill fixing, contact with a cover flashing or an additional bracket? Each serves a different purpose. The property manager should ask for an explanation of the proposed detail, rather than use a general table of metals to decide which parts must be replaced on site.
2. A stainless steel screw does not describe the whole connection
A material designation needs context
Combining aluminium and stainless steel is not automatically unsuitable. Environmental conditions and the relative exposed surface areas matter. The design must establish the suitability of the particular connection.
If the quotation says only “stainless steel fasteners”, request a reference to the technical specification and relevant drawing. You need to know which locations the statement covers and how the specified product will be identified on delivery. A screw of the same appearance or diameter is not necessarily an approved replacement. This article does not specify a steel grade, fastener size or tightening torque for your building.
3. Prepare a schedule of interfaces for the aluminium balconies
One record for each different connection
Use simple location references on the elevation drawing to mark the interfaces that need clarification. There is no need to describe an identical repeated detail separately for every flat, but record its variations. Otherwise, a top-floor balcony beside the roof or an end position beside an existing downpipe may be overlooked.
- Location reference and the purpose of the connection or contact.
- The new component and the part being retained from the existing installation.
- Known material, surface finish and the document supporting that information.
- Reference to the proposed detail and the person responsible for confirming it.
- Open question, date for resolving it and revision of the final document.
If the material of an old component is unknown, record it as “unverified”. A silver appearance in a photograph does not reliably identify its composition. Arrange for the information to be established during the professional site inspection.
4. Ask about water at the actual detail
An overall photograph and a close-up answer different questions
For the site visit, show the position beneath the roof, beside a downpipe or near a window sill, together with the visible connection. From a safe position, you can also record water ingress or accumulated dirt that you have already observed. Do not create a test by pouring water over the detail, and do not remove covers to obtain a better photograph.
When asking the designer, explain whether the area is regularly wet, concealed or of unknown condition. Request an explanation of how that situation has been addressed in the design. A general statement that a component is “for outdoor use” does not answer a question about the marked location. Photographs help prepare an investigation; they cannot confirm that a concealed detail works correctly.
5. Surface finishes and separation between metals serve different purposes
A coloured finish is not evidence of electrical isolation
The ASSDA technical guide to dissimilar-metal contact explains that a coating can be damaged during installation or movement. It should not be assumed to provide reliable electrical insulation without assessment. Any necessary separation belongs in the connection design.
When discussing a quotation, distinguish the appearance and specification of the KOMAXIT powder coating from the specified interface detail. If that detail includes a separating component, ask for its identification in the documentation. Do not add rubber, tape or washers on your own initiative. A responsible specialist must assess a proposed change to a structural connection before it is used, even if the added component appears insignificant.
6. What to request when comparing quotations
Compare quotations based on the same assumptions about retained components. One may allow for replacing an existing flashing, another for keeping it, while a third still assumes an unverified condition. These are different scopes of work. Questions about suspended balcony costs should therefore include who will check and complete the adjoining interface.
Ask which material interfaces the balcony contractor will resolve, which belong to another trade and what information they need to coordinate their work. For an unresolved question, establish whether it prevents completion of the design or only affects a separate priced item. Do not treat an incomplete answer as a confirmed inclusion in a fixed price. Obtain the missing information, then compare the same revision of the brief across all quotations.
7. Keep the material detail intact through subsequent work
During suspended balcony installation, work on the façade, roof and flashings may meet at the same location. Agree who will pass the confirmed detail to the next contractor. A note saying “balcony complete” does not tell the sheet-metal installer which drawing governs the adjoining work.
Before an area becomes inaccessible, agree a check and a way to record it. Keep the record practical: a detail reference, a photograph taken by an authorised person, the date and confirmation that the work matches the approved detail. If a different flashing or fastener is proposed on site, resolve that change first. The property manager needs a clear status such as “confirmed”, “awaiting assessment” or “information required”, rather than an assumption based on a verbal conversation.
8. Worked example: retaining an existing flashing
Consider a building commissioning replacement balconies while intending to retain an existing side flashing. Its material and connection have not yet been documented. This is an illustrative briefing example, not an account of a particular HS ALUSYSTEM project.
The property manager first marks the location on a sketch and attaches the available records. The contractor identifies what must be established at the site inspection and who will develop the final interface. Following verification, there are two possible outcomes: retention with a confirmed detail, or a change of scope with a justified alteration. The saving from avoiding a new flashing is not the sole basis for choosing an acceptable solution.
The selected arrangement, drawing reference and scope of work are then incorporated into the final brief. The person responsible for the balconies and the person responsible for the flashing receive the same information. This closes the question of material compatibility before uncertainty turns into improvisation during installation.
9. What to retain for future management
Keep final details, identification of important components and approved changes in the building records. If a clothes dryer or shading is added later, the starting arrangement will be clear. Our separate guide to accessories for aluminium balconies explains how to assemble information about a specific product and its attachment.
If staining, a surface change or damage appears near a connection, do not determine the cause from a photograph alone. Record the location and circumstances and follow the procedure for reporting an aluminium balcony service issue. Do not dismantle the connection or paint over the new finding before assessment. For the broader context, see our guide to aluminium balcony service life.
10. Frequently asked questions
Is every aluminium-to-stainless-steel connection a defect?
No. The pair of materials alone is not enough to assess it. Ask for confirmation of the particular detail for its location and conditions, rather than a blanket prohibition or an unsupported assurance.
Is it enough to know that the balcony has a KOMAXIT coating?
Not when assessing a material interface. The finish is one part of the specification; the connection arrangement and any separation between materials must be clear in its documentation.
Can a property manager order similar replacement screws?
Identify the replacement from the documentation and obtain confirmation of its suitability. Diameter, colour or the description “stainless steel” alone does not establish interchangeability within a particular balcony assembly.
Must every old flashing be removed automatically?
There is no universal answer. First establish its material, condition and proposed connection. In the quotation, distinguish confirmed retention from an assumption still awaiting a site inspection.
What if information about a concealed detail is missing?
Identify the missing record and contact the contractor or designer. A specialist should decide how to gain access. Residents should not dismantle structural fixings or infill panels to obtain a photograph.
11. Prepare a brief for your building
When enquiring about new aluminium balconies, include photographs of the façade, the available design documents and a list of components you want to retain. Mark unclear interfaces with flashings, railings or accessories separately. This helps focus the site visit and assign responsibility for adjoining work.
Browse HS ALUSYSTEM completed projects and send your documents for assessment and a quotation. The aim is a clear specification for your building that can be consulted during manufacture, installation and future servicing.